@ata,
Cevap için teşekkürler,akşam detaylı bilgi aktarabilirim çünkü ilgili bilgisayar evde.
Ringlerle ilgili hata veriyordu,conky manager e ilave eder dener ve sonucu bildirirm.

ben de çalışan şekli ile içerikleri verdim dener dönüş yaparsan yardımcı olmaya çalışırım

ben de çalışan şekli ile içerikleri verdim dener dönüş yaparsan yardımcı olmaya çalışırım

Teşekkürler,ekli hatayı alıyorum:

Conky: can't open '/sys/class/thermal/thermal_zone0/temp': No such file or directory
Conky: one or more $endif's are missing
Conky: desktop window (800003) is subwindow of root window (2d2)
Conky: window type - normal
Conky: drawing to created window (0x3e00002)
Conky: drawing to double buffer
Conky: llua_do_call: function conky_clock_rings execution failed: /home/mumcu/.conky/clock_rings.lua:313: attempt to perform arithmetic on local 'value' (a nil value)

şu şekilde kurdunuz  mu

yaourt -S conky-lua

şu şekilde bir deneyelim

--[[
Clock Rings by Linux Mint (2011) reEdited by despot77

This script draws percentage meters as rings, and also draws clock hands if you want! It is fully customisable; all options are described in the script. This script is based off a combination of my clock.lua script and my rings.lua script

IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement on line 145 uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num>5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num>3; conversely if you update Conky every 0.5s, you should use update_num>10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.

To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
    lua_load ~/scripts/clock_rings.lua
    lua_draw_hook_pre clock_rings
   
Changelog:
+ v1.0 -- Original release (30.09.2009)
   v1.1p -- Jpope edit londonali1010 (05.10.2009)
*v 2011mint -- reEdit despot77 (18.02.2011)
]]

settings_table = {
   
    {
        name='fs_used_perc',
        arg='/',
        max=100,
        bg_colour=0xffbf00,
        bg_alpha=0.5,
        fg_colour=0xb31212,
        fg_alpha=0.8,
        x=50, y=380,
        radius=37,
        thickness=4,
        start_angle=-90,
        end_angle=180
    },
    {
        name='downspeedf',
        arg='wlp2s0',
        max=100,
        bg_colour=0x0d558c,
        bg_alpha=0.5,
        fg_colour=0x000000,
        fg_alpha=1,
        x=150, y=380,
        radius=37,
        thickness=4,
        start_angle=90,
        end_angle=360
    },
   
{
        name='swapperc',
        arg='',
        max=100,
        bg_colour=0x000000,
        bg_alpha=0.8,
        fg_colour=0xb31212,
        fg_alpha=0.8,
        x=100, y=510,
        radius=40,
        thickness=4,
        start_angle=-90,
        end_angle=180
    },
{
        name='cpu',
        arg='cpu0',
        max=100,
        bg_colour=0xffffff,
        bg_alpha=0.3,
        fg_colour=0xb31212,
        fg_alpha=0.8,
        x=100, y=105,
        radius=65,
        thickness=4,
        start_angle=-90,
        end_angle=25
    },
{
        name='memperc',
        arg='',
        max=100,
        bg_colour=0xffffff,
        bg_alpha=0.3,
        fg_colour=0xb31212,
        fg_alpha=1,
        x=100, y=105,
        radius=65,
        thickness=4,
        start_angle=90,
        end_angle=205
    },
{
        name='acpitemp',
        arg='',
        max=100,
        bg_colour=0x000000,
        bg_alpha=0.8,
        fg_colour=0xb31212,
        fg_alpha=0.8,
        x=100, y=250,
        radius=42,
        thickness=4,
        start_angle=90,
        end_angle=360
    },
{
        name='cpu',
        arg='',
        max=100,
        bg_colour=0xb31212,
        bg_alpha=0.9,
        fg_colour=0xb31212,
        fg_alpha=0,
        x=100, y=435,
        radius=7,
        thickness=4,
        start_angle=0,
        end_angle=360
    },{
        name='cpu',
        arg='',
        max=100,
        bg_colour=0x7ca7c6,
        bg_alpha=0.9,
        fg_colour=0xb31212,
        fg_alpha=0,
        x=100, y=325,
        radius=7,
        thickness=4,
        start_angle=0,
        end_angle=360
    },
   
    {
    name='cpu',
        arg='',
        max=100,
        bg_colour=0x000000,
        bg_alpha=0.8,
        fg_colour=0xb31212,
        fg_alpha=0,
        x=100, y=620,
        radius=39,
        thickness=4,
        start_angle=-90,
        end_angle=180
    },{
        name='cpu',
        arg='',
        max=100,
        bg_colour=0xffffff,
        bg_alpha=0.3,
        fg_colour=0xb31212,
        fg_alpha=0,
        x=100, y=105,
        radius=45,
        thickness=4,
        start_angle=30,
        end_angle=90
    }
    ,{
        name='cpu',
        arg='',
        max=100,
        bg_colour=0xffffff,
        bg_alpha=1,
        fg_colour=0xb31212,
        fg_alpha=0,
        x=100, y=105,
        radius=45,
        thickness=4,
        start_angle=102,
        end_angle=162
    },{
        name='cpu',
        arg='',
        max=100,
        bg_colour=0xff0000,
        bg_alpha=1,
        fg_colour=0xb31212,
        fg_alpha=0,
        x=100, y=105,
        radius=45,
        thickness=4,
        start_angle=174,
        end_angle=234
    },{
        name='cpu',
        arg='',
        max=100,
        bg_colour=0x000000,
        bg_alpha=0.8,
        fg_colour=0xb31212,
        fg_alpha=0,
        x=100, y=105,
        radius=45,
        thickness=4,
        start_angle=246,
        end_angle=306
    },{
        name='cpu',
        arg='',
        max=100,
        bg_colour=0xffbf00,
        bg_alpha=0.8,
        fg_colour=0xb31212,
        fg_alpha=0,
        x=100, y=105,
        radius=45,
        thickness=4,
        start_angle=318,
        end_angle=18
    }

}

-- Use these settings to define the origin and extent of your clock.



-- "clock_x" and "clock_y" are the coordinates of the centre of the clock, in pixels, from the top left of the Conky window.

clock_x=100
clock_y=250

show_seconds=true

require 'cairo'

function rgb_to_r_g_b(colour,alpha)
    return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end

function draw_ring(cr,t,pt)
    local w,h=conky_window.width,conky_window.height
   
    local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
    local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']

    local angle_0=sa*(2*math.pi/360)-math.pi/2
    local angle_f=ea*(2*math.pi/360)-math.pi/2
    local t_arc=t*(angle_f-angle_0)

    -- Draw background ring

    cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
    cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
    cairo_set_line_width(cr,ring_w)
    cairo_stroke(cr)
   
    -- Draw indicator ring

    cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
    cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
    cairo_stroke(cr)       
end

function draw_clock_hands(cr,xc,yc)
    local secs,mins,hours,secs_arc,mins_arc,hours_arc
    local xh,yh,xm,ym,xs,ys
   
    secs=os.date("%S")   
    mins=os.date("%M")
    hours=os.date("%I")
       
    secs_arc=(2*math.pi/60)*secs
    mins_arc=(2*math.pi/60)*mins+secs_arc/60
    hours_arc=(2*math.pi/12)*hours+mins_arc/12
       
  -- Draw hour hand
   
    --xh=xc+0.7*clock_r*math.sin(hours_arc)
    --yh=yc-0.7*clock_r*math.cos(hours_arc)
    cairo_move_to(cr,xc,yc)
    --cairo_line_to(cr,xh,yh)
   
    cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND)
    cairo_set_line_width(cr,5)
    cairo_set_source_rgba(cr,1.0,1.0,1.0,1.0)
    cairo_stroke(cr)
   
    -- Draw minute hand
   
    --xm=xc+clock_r*math.sin(mins_arc)
    --ym=yc-clock_r*math.cos(mins_arc)
    cairo_move_to(cr,xc,yc)
    --cairo_line_to(cr,xm,ym)
   
    cairo_set_line_width(cr,3)
    cairo_stroke(cr)
   
    -- Draw seconds hand
   
    if show_seconds then
        --xs=xc+clock_r*math.sin(secs_arc)
        --ys=yc-clock_r*math.cos(secs_arc)
        cairo_move_to(cr,xc,yc)
        --cairo_line_to(cr,xs,ys)
   
        cairo_set_line_width(cr,1)
        cairo_stroke(cr)
    end
end

function conky_clock_rings()
    local function setup_rings(cr,pt)
        local str=''
        local value=0
       
        str=string.format('${%s %s}',pt['name'],pt['arg'])
        str=conky_parse(str)
       
        value=tonumber(str)
        if value == nil then value = 0 end
        pct=value/pt['max']
       
        draw_ring(cr,pct,pt)
    end
   
    -- Check that Conky has been running for at least 5s

    if conky_window==nil then return end
    local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)
   
    local cr=cairo_create(cs)   
   
    local updates=conky_parse('${updates}')
    update_num=tonumber(updates)
   
    if update_num>5 then
        for i in pairs(settings_table) do
            setup_rings(cr,settings_table)
        end
    end
   
    draw_clock_hands(cr,clock_x,clock_y)
end

	#   http://www.NoobsLab.com  #
#      Conky settings      #

background no
update_interval 1

cpu_avg_samples 4
net_avg_samples 2

override_utf8_locale yes

double_buffer yes
no_buffers yes

text_buffer_size 2048
#imlib_cache_size 0

temperature_unit fahrenheit

# Window specifications #

own_window_class Conky   
own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_argb_visual yes

border_inner_margin 1
border_outer_margin 0

minimum_size 200 750
maximum_width 200

alignment tr
gap_x 45
gap_y 100

# Graphics settings #
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no

# Text settings #

use_xft yes
xftfont Dejavu Sans:size=9
xftalpha 0.2

uppercase no

temperature_unit celsius

default_color FFFFFF

lua_load ~/.clock_rings.lua
lua_draw_hook_pre clock_rings

TEXT
${font FreeSans:size=11}${color FFFFFF}${goto 65}${voffset 80} İSTANBUL${font}
${font FreeSans:size=11}${color FFFFFF}${alignr}${goto 85}${voffset 10}${weather  http://weather.noaa.gov/pub/data/observations/metar/stations/  LTAC temperature temperature 30}°C${font}
${color FFFFFF}${goto 25}${voffset -18}${cpu cpu0}%
${color 7ca7c6}${goto 12}${voffset -70}CPU
${color FFFFFF}${goto 160}${voffset 20}${memperc}%
${color 7ca7c6}${goto 165}${voffset 30}RAM
${color FFFFFF}${goto 70}${voffset 60}${font weather:size=28} ${font}CPU ${acpitemp} °C
${color FFFFFF}${goto 12}${voffset 150}${fs_used_perc /}%
${color 7ca7c6}${goto 35}${voffset -40}HDD
${color FFFFFF}${goto 155}${voffset -33}${if_up wlp20s0}${downspeed wlp20s0}${endif}${if_up eth0}${downspeed eth0}
${color 7ca7c6}${goto 135}${voffset 3}DwSp
${color 7ca7c6}${goto 85}${voffset 115}Swap
${color FFFFFF}${goto 67}${voffset 8}${swapperc}%   
${color FFFFFF}${goto 79}${voffset 48} Down.
${color FFFFFF}${goto 74}${voffset 10} ${totaldown wlp20s0}
${color FFFFFF}${goto 89}${voffset 4}${font PizzaDude Bullets:size=16}S${font}