Türkiye
Az konuş, çok çalış..

Forum

Bildirimler
Tümünü temizle

Xorg çok geç açılıyor

25 Yazılar
3 Üyeler
0 Reactions
10.4 K Görüntüleme
 ufuk
(@ufuk)
Gönderiler: 49
Trusted Member
 

Bilgisayar açılırken o bekleme yerlerinde bir anlık uyarı yazısı çıkıyor mu? Çok hızlı geçiyorsa telefonla ekran videosu çekip okuyabilirsiniz. Bir seferinde ben takas alanının id sinin değiştiği aklıma gelmediği için videoya alıp bağlanmadığı uyarısını görmüştüm. Normal okunmayacak kadar hızlı geçiyodu.

Klavyeden pc105'in silinmesi dışında bir sorun göremedim. /etc/X11 'de xorg.conf dosyası var mı? Sanırım sanal bir arch linux kurmam gerekecek. Manjaro üzerinden sadece tahmin edebiliyorum.

 
Gönderildi : 14/08/2013 11:24 am
(@cokomoko)
Gönderiler: 76
Trusted Member
Konu başlatıcı
 

Valla uyarı yazısı çıkmıyor. Zaten öyle yazılar filan akmıyor, manjarodaki gibi.Zaten ben o yazıları çıkarmak için bir ara arch tr forumunda bir yazı okumuştum, orada da kesin bir cevap yoktu. Bakınız; http://archtr.org/forum/viewtopic.php?f=30&t=153&p=1621&hilit=akan+yaz%C4%B1lar#p1621
/etc/X11'de xorg.conf var, çıktısı:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 325.15  (buildmeister@swio-display-x64-rhel04-03)  Wed Jul 31 19:04:27 PDT 2013


Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    Option         "NoLogo"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "NoLogo"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

 
Gönderildi : 14/08/2013 12:09 pm
 ufuk
(@ufuk)
Gönderiler: 49
Trusted Member
 

Son olarak tahminim:
xorg.conf dosyasına

Section "Module"
        Disable "glx"
EndSection

ekleyin. Ben şimdi ekledim, bir sorun oluşmuyor. Ve klavyeye tekrar

Option "XkbModel" "pc105"

satırını ekleyin.
Pazar gününe kadar çözüm bulmuş olmanız dileğiyle.

 
Gönderildi : 14/08/2013 12:56 pm
(@cokomoko)
Gönderiler: 76
Trusted Member
Konu başlatıcı
 

Evet bu şekilde yapınca nvidia'da beklemiyor ama klavyeyle ilgili bölümde bekliyor.Xorg.log çıktısı:

[    13.964] 
X.Org X Server 1.14.2
Release Date: 2013-06-25
[    13.964] X Protocol Version 11, Revision 0
[    13.964] Build Operating System: Linux 3.9.7-1-ARCH x86_64 
[    13.964] Current Operating System: Linux cokomoko 3.10.6-2-ARCH #1 SMP PREEMPT Tue Aug 13 09:47:01 CEST 2013 x86_64
[    13.964] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=26f4be15-7289-4410-be81-bbb53c27dac0 rw quiet
[    13.964] Build Date: 01 July 2013  10:48:42AM
[    13.964]  
[    13.964] Current version of pixman: 0.30.2
[    13.964] 	Before reporting problems, check  http://wiki.x.org 
	to make sure that you have the latest version.
[    13.964] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    13.964] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 14 17:10:32 2013
[    14.031] (==) Using config file: "/etc/X11/xorg.conf"
[    14.031] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    14.319] (==) ServerLayout "Layout0"
[    14.319] (**) |-->Screen "Screen0" (0)
[    14.319] (**) |   |-->Monitor "Monitor0"
[    14.319] (**) |   |-->Device "Device0"
[    14.319] (**) |-->Input Device "Keyboard0"
[    14.319] (**) |-->Input Device "Mouse0"
[    14.319] (==) Automatically adding devices
[    14.319] (==) Automatically enabling devices
[    14.319] (==) Automatically adding GPU devices
[    14.523] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    14.523] 	Entry deleted from font path.
[    14.523] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    14.523] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    14.523] 	Entry deleted from font path.
[    14.523] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    14.523] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[    14.523] (==) ModulePath set to "/usr/lib/xorg/modules"
[    14.523] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    14.523] (WW) Disabling Keyboard0
[    14.523] (WW) Disabling Mouse0
[    14.559] (II) Loader magic: 0x7fdc20
[    14.559] (II) Module ABI versions:
[    14.559] 	X.Org ANSI C Emulation: 0.4
[    14.559] 	X.Org Video Driver: 14.1
[    14.559] 	X.Org XInput driver : 19.1
[    14.559] 	X.Org Server Extension : 7.0
[    14.559] (II) xfree86: Adding drm device (/dev/dri/card0)
[    14.561] (--) PCI:*(0:1:0:0) 10de:0a28:1179:ff00 rev 162, Mem @ 0xf3000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[    14.562] Initializing built-in extension Generic Event Extension
[    14.562] Initializing built-in extension SHAPE
[    14.562] Initializing built-in extension MIT-SHM
[    14.562] Initializing built-in extension XInputExtension
[    14.562] Initializing built-in extension XTEST
[    14.562] Initializing built-in extension BIG-REQUESTS
[    14.562] Initializing built-in extension SYNC
[    14.562] Initializing built-in extension XKEYBOARD
[    14.562] Initializing built-in extension XC-MISC
[    14.562] Initializing built-in extension SECURITY
[    14.562] Initializing built-in extension XINERAMA
[    14.562] Initializing built-in extension XFIXES
[    14.562] Initializing built-in extension RENDER
[    14.562] Initializing built-in extension RANDR
[    14.562] Initializing built-in extension COMPOSITE
[    14.562] Initializing built-in extension DAMAGE
[    14.562] Initializing built-in extension MIT-SCREEN-SAVER
[    14.562] Initializing built-in extension DOUBLE-BUFFER
[    14.562] Initializing built-in extension RECORD
[    14.562] Initializing built-in extension DPMS
[    14.562] Initializing built-in extension X-Resource
[    14.562] Initializing built-in extension XVideo
[    14.562] Initializing built-in extension XVideo-MotionCompensation
[    14.562] Initializing built-in extension XFree86-VidModeExtension
[    14.562] Initializing built-in extension XFree86-DGA
[    14.562] Initializing built-in extension XFree86-DRI
[    14.562] Initializing built-in extension DRI2
[    14.562] (WW) "glx" will not be loaded unless you've specified it to be loaded elsewhere.
[    14.562] (II) "glx" will be loaded even though the default is to disable it.
[    14.562] (II) LoadModule: "nvidia"
[    14.612] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    14.771] (II) Module nvidia: vendor="NVIDIA Corporation"
[    14.771] 	compiled for 4.0.2, module version = 1.0.0
[    14.771] 	Module class: X.Org Video Driver
[    14.777] (II) NVIDIA dlloader X Driver  325.15  Wed Jul 31 17:50:57 PDT 2013
[    14.777] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    14.789] (++) using VT number 7

[    14.793] (II) Loading sub module "fb"
[    14.793] (II) LoadModule: "fb"
[    14.802] (II) Loading /usr/lib/xorg/modules/libfb.so
[    14.828] (II) Module fb: vendor="X.Org Foundation"
[    14.828] 	compiled for 1.14.2, module version = 1.0.0
[    14.828] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    14.828] (WW) Unresolved symbol: fbGetGCPrivateKey
[    14.828] (II) Loading sub module "wfb"
[    14.828] (II) LoadModule: "wfb"
[    14.828] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    14.829] (II) Module wfb: vendor="X.Org Foundation"
[    14.829] 	compiled for 1.14.2, module version = 1.0.0
[    14.829] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    14.829] (II) Loading sub module "shadow"
[    14.829] (II) LoadModule: "shadow"
[    14.830] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    14.836] (II) Module shadow: vendor="X.Org Foundation"
[    14.836] 	compiled for 1.14.2, module version = 1.1.0
[    14.836] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    14.837] (II) Loading sub module "ramdac"
[    14.837] (II) LoadModule: "ramdac"
[    14.837] (II) Module "ramdac" already built-in
[    14.868] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    14.868] (==) NVIDIA(0): RGB weight 888
[    14.868] (==) NVIDIA(0): Default visual is TrueColor
[    14.868] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    14.868] (**) NVIDIA(0): Option "NoLogo"
[    14.868] (**) NVIDIA(0): Enabling 2D acceleration
[    14.868] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[    14.868] (EE) NVIDIA(0):     log file that the GLX module has been loaded in your X
[    14.868] (EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If
[    14.868] (EE) NVIDIA(0):     you continue to encounter problems, Please try
[    14.868] (EE) NVIDIA(0):     reinstalling the NVIDIA driver.
[    16.054] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[    16.060] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    16.060] (II) NVIDIA(GPU-0):     Vision stereo.
[    16.060] (II) NVIDIA(0): NVIDIA GPU GeForce GT 230M (GT216) at PCI:1:0:0 (GPU-0)
[    16.060] (--) NVIDIA(0): Memory: 1048576 kBytes
[    16.060] (--) NVIDIA(0): VideoBIOS: 70.16.27.00.14
[    16.060] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    16.064] (--) NVIDIA(0): Valid display device(s) on GeForce GT 230M at PCI:1:0:0
[    16.064] (--) NVIDIA(0):     CRT-0
[    16.064] (--) NVIDIA(0):     Seiko/Epson (DFP-0) (boot, connected)
[    16.064] (--) NVIDIA(0):     DFP-1
[    16.064] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    16.064] (--) NVIDIA(0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
[    16.064] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal Dual Link LVDS
[    16.064] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[    16.064] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    16.064] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    16.064] (**) NVIDIA(0):     device Seiko/Epson (DFP-0) (Using EDID frequencies has
[    16.064] (**) NVIDIA(0):     been enabled on all display devices.)
[    16.065] (==) NVIDIA(0): 
[    16.065] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    16.065] (==) NVIDIA(0):     will be used as the requested mode.
[    16.065] (==) NVIDIA(0): 
[    16.065] (II) NVIDIA(0): Validated MetaModes:
[    16.065] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select{}"
[    16.065] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
[    17.137] (--) NVIDIA(0): DPI set to (99, 97); computed from "UseEdidDpi" X config
[    17.137] (--) NVIDIA(0):     option
[    17.137] (--) Depth 24 pixmap format is 32 bpp
[    17.137] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    17.150] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    17.150] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    17.150] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    17.150] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    17.150] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    17.150] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    17.150] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    17.150] (II) NVIDIA(0):     Config Options in the README.
[    17.153] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select{}"
[    17.501] Loading extension NV-GLX
[    17.566] (==) NVIDIA(0): Disabling shared memory pixmaps
[    17.566] (==) NVIDIA(0): Backing store disabled
[    17.566] (==) NVIDIA(0): Silken mouse enabled
[    17.642] (**) NVIDIA(0): DPMS enabled
[    17.642] Loading extension NV-CONTROL
[    17.643] Loading extension XINERAMA
[    17.643] (II) Loading sub module "dri2"
[    17.643] (II) LoadModule: "dri2"
[    17.643] (II) Module "dri2" already built-in
[    17.643] (II) NVIDIA(0): [DRI2] Setup complete
[    17.643] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    17.643] (--) RandR disabled
[    17.978] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    17.978] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    17.978] (II) LoadModule: "evdev"
[    17.990] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.010] (II) Module evdev: vendor="X.Org Foundation"
[    18.010] 	compiled for 1.14.2, module version = 2.8.1
[    18.010] 	Module class: X.Org XInput Driver
[    18.010] 	ABI class: X.Org XInput driver, version 19.1
[    18.010] (II) Using input driver 'evdev' for 'Power Button'
[    18.010] (**) Power Button: always reports core events
[    18.010] (**) evdev: Power Button: Device: "/dev/input/event5"
[    18.010] (--) evdev: Power Button: Vendor 0 Product 0x1
[    18.010] (--) evdev: Power Button: Found keys
[    18.010] (II) evdev: Power Button: Configuring as keyboard
[    18.010] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[    18.010] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    18.010] (**) Option "xkb_rules" "evdev"
[    18.010] (**) Option "xkb_model" "pc105"
[    18.010] (**) Option "xkb_layout" "tr"
[    18.052] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    18.052] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    18.052] (II) Using input driver 'evdev' for 'Video Bus'
[    18.052] (**) Video Bus: always reports core events
[    18.052] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    18.052] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    18.052] (--) evdev: Video Bus: Found keys
[    18.052] (II) evdev: Video Bus: Configuring as keyboard
[    18.052] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6/event6"
[    18.052] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    18.052] (**) Option "xkb_rules" "evdev"
[    18.052] (**) Option "xkb_model" "pc105"
[    18.052] (**) Option "xkb_layout" "tr"
[    18.053] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    18.053] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.053] (II) Using input driver 'evdev' for 'Power Button'
[    18.053] (**) Power Button: always reports core events
[    18.053] (**) evdev: Power Button: Device: "/dev/input/event4"
[    18.053] (--) evdev: Power Button: Vendor 0 Product 0x1
[    18.053] (--) evdev: Power Button: Found keys
[    18.053] (II) evdev: Power Button: Configuring as keyboard
[    18.053] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[    18.053] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    18.053] (**) Option "xkb_rules" "evdev"
[    18.053] (**) Option "xkb_model" "pc105"
[    18.053] (**) Option "xkb_layout" "tr"
[    18.053] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    18.053] (II) No input driver specified, ignoring this device.
[    18.053] (II) This device may have been added with another device file.
[    18.054] (II) config/udev: Adding drm device (/dev/dri/card0)
[    18.054] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
[    18.054] (II) No input driver specified, ignoring this device.
[    18.054] (II) This device may have been added with another device file.
[    18.054] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
[    18.054] (II) No input driver specified, ignoring this device.
[    18.054] (II) This device may have been added with another device file.
[    18.054] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
[    18.054] (II) No input driver specified, ignoring this device.
[    18.054] (II) This device may have been added with another device file.
[    18.054] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[    18.054] (II) No input driver specified, ignoring this device.
[    18.054] (II) This device may have been added with another device file.
[    18.055] (II) config/udev: Adding input device USB 2.0 HD Camera  (/dev/input/event16)
[    18.055] (**) USB 2.0 HD Camera : Applying InputClass "evdev keyboard catchall"
[    18.055] (II) Using input driver 'evdev' for 'USB 2.0 HD Camera '
[    18.055] (**) USB 2.0 HD Camera : always reports core events
[    18.055] (**) evdev: USB 2.0 HD Camera : Device: "/dev/input/event16"
[    18.055] (--) evdev: USB 2.0 HD Camera : Vendor 0x64e Product 0xc117
[    18.055] (--) evdev: USB 2.0 HD Camera : Found keys
[    18.055] (II) evdev: USB 2.0 HD Camera : Configuring as keyboard
[    18.055] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb7/7-6/7-6:1.0/input/input16/event16"
[    18.055] (II) XINPUT: Adding extended input device "USB 2.0 HD Camera " (type: KEYBOARD, id 9)
[    18.055] (**) Option "xkb_rules" "evdev"
[    18.055] (**) Option "xkb_model" "pc105"
[    18.055] (**) Option "xkb_layout" "tr"
[    18.055] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[    18.055] (II) No input driver specified, ignoring this device.
[    18.055] (II) This device may have been added with another device file.
[    18.055] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[    18.055] (II) No input driver specified, ignoring this device.
[    18.055] (II) This device may have been added with another device file.
[    18.056] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[    18.056] (II) No input driver specified, ignoring this device.
[    18.056] (II) This device may have been added with another device file.
[    18.056] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[    18.056] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    18.056] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    18.056] (**) Logitech USB Receiver: always reports core events
[    18.056] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[    18.056] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[    18.056] (--) evdev: Logitech USB Receiver: Found keys
[    18.056] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    18.056] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/input/input1/event1"
[    18.056] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[    18.056] (**) Option "xkb_rules" "evdev"
[    18.056] (**) Option "xkb_model" "pc105"
[    18.056] (**) Option "xkb_layout" "tr"
[    18.057] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[    18.057] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    18.057] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    18.057] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    18.057] (**) Logitech USB Receiver: always reports core events
[    18.057] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[    18.057] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[    18.057] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[    18.057] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    18.057] (--) evdev: Logitech USB Receiver: Found relative axes
[    18.057] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    18.057] (--) evdev: Logitech USB Receiver: Found absolute axes
[    18.057] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[    18.057] (--) evdev: Logitech USB Receiver: Found keys
[    18.057] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    18.057] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    18.057] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    18.057] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    18.057] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    18.057] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.1/input/input2/event2"
[    18.057] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[    18.057] (**) Option "xkb_rules" "evdev"
[    18.057] (**) Option "xkb_model" "pc105"
[    18.057] (**) Option "xkb_layout" "tr"
[    18.057] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    18.057] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    18.057] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    18.057] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    18.057] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    18.057] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    18.058] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    18.058] (II) No input driver specified, ignoring this device.
[    18.058] (II) This device may have been added with another device file.
[    18.058] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    18.058] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    18.058] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    18.058] (**) AT Translated Set 2 keyboard: always reports core events
[    18.058] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    18.058] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    18.058] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    18.058] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    18.058] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    18.058] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    18.058] (**) Option "xkb_rules" "evdev"
[    18.058] (**) Option "xkb_model" "pc105"
[    18.058] (**) Option "xkb_layout" "tr"
[    18.058] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event17)
[    18.058] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    18.058] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    18.058] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    18.058] (II) LoadModule: "synaptics"
[    18.059] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    18.123] (II) Module synaptics: vendor="X.Org Foundation"
[    18.123] 	compiled for 1.14.1, module version = 1.7.1
[    18.123] 	Module class: X.Org XInput Driver
[    18.123] 	ABI class: X.Org XInput driver, version 19.1
[    18.123] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    18.123] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    18.123] (**) Option "Device" "/dev/input/event17"
[    18.276] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    18.276] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5772 (res 69)
[    18.276] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5086 (res 118)
[    18.277] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    18.277] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    18.277] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    18.277] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    18.277] (**) Option "EmulateTwoFingerMinZ" "40"
[    18.277] (**) Option "EmulateTwoFingerMinW" "8"
[    18.277] (**) Option "VertEdgeScroll" "on"
[    18.277] (**) Option "HorizEdgeScroll" "on"
[    18.277] (**) Option "VertTwoFingerScroll" "on"
[    18.277] (**) Option "HorizTwoFingerScroll" "on"
[    18.277] (**) Option "TapButton1" "1"
[    18.277] (**) Option "TapButton2" "2"
[    18.277] (**) Option "TapButton3" "3"
[    18.277] (**) Option "CircularScrolling" "on"
[    18.277] (**) Option "CircScrollTrigger" "2"
[    18.277] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    18.277] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    18.317] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input17/event17"
[    18.317] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    18.317] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    18.317] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    18.317] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[    18.318] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    18.318] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    18.318] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    18.318] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    18.318] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    18.319] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    18.319] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    18.319] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[    18.319] (II) No input driver specified, ignoring this device.
[    18.319] (II) This device may have been added with another device file.
[    18.321] (II) config/udev: Adding input device Toshiba input device (/dev/input/event7)
[    18.321] (**) Toshiba input device: Applying InputClass "evdev keyboard catchall"
[    18.321] (II) Using input driver 'evdev' for 'Toshiba input device'
[    18.321] (**) Toshiba input device: always reports core events
[    18.321] (**) evdev: Toshiba input device: Device: "/dev/input/event7"
[    18.321] (--) evdev: Toshiba input device: Vendor 0 Product 0
[    18.321] (--) evdev: Toshiba input device: Found keys
[    18.321] (II) evdev: Toshiba input device: Configuring as keyboard
[    18.321] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[    18.321] (II) XINPUT: Adding extended input device "Toshiba input device" (type: KEYBOARD, id 14)
[    18.321] (**) Option "xkb_rules" "evdev"
[    18.321] (**) Option "xkb_model" "pc105"
[    18.321] (**) Option "xkb_layout" "tr"
[    34.667] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.667] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.670] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.670] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.671] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.671] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.693] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.693] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.698] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.698] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.786] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.786] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.803] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.803] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.809] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.809] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.822] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.822] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.827] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.827] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.829] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.829] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.837] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.837] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.839] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.839] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.845] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.845] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.853] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.853] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.858] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.858] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.861] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.862] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.870] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.870] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.887] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.887] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.889] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.889] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.899] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.899] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.918] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.918] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.953] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.953] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.959] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.959] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.977] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.977] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.982] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.982] (II) NVIDIA(GPU-0):     Vision stereo.
[    34.994] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    34.994] (II) NVIDIA(GPU-0):     Vision stereo.
[    35.006] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    35.006] (II) NVIDIA(GPU-0):     Vision stereo.
[    35.020] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    35.020] (II) NVIDIA(GPU-0):     Vision stereo.
[    35.049] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    35.049] (II) NVIDIA(GPU-0):     Vision stereo.
[    35.059] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    35.060] (II) NVIDIA(GPU-0):     Vision stereo.
[    35.071] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    35.071] (II) NVIDIA(GPU-0):     Vision stereo.
[    35.083] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    35.083] (II) NVIDIA(GPU-0):     Vision stereo.
[    35.092] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    35.092] (II) NVIDIA(GPU-0):     Vision stereo.
[    35.103] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    35.103] (II) NVIDIA(GPU-0):     Vision stereo.
[    35.373] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    35.373] (II) NVIDIA(GPU-0):     Vision stereo.
[    35.391] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    35.391] (II) NVIDIA(GPU-0):     Vision stereo.
[    36.118] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    36.151] (II) NVIDIA(GPU-0):     Vision stereo.
[    36.153] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    36.153] (II) NVIDIA(GPU-0):     Vision stereo.
[    36.159] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    36.159] (II) NVIDIA(GPU-0):     Vision stereo.
[    36.160] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    36.160] (II) NVIDIA(GPU-0):     Vision stereo.
[    36.984] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    36.984] (II) NVIDIA(GPU-0):     Vision stereo.
[    37.035] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    37.035] (II) NVIDIA(GPU-0):     Vision stereo.
[    37.037] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    37.037] (II) NVIDIA(GPU-0):     Vision stereo.
[    37.039] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    37.039] (II) NVIDIA(GPU-0):     Vision stereo.
[    37.041] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    37.041] (II) NVIDIA(GPU-0):     Vision stereo.

Neyse ben araştırmaya devam edeceğim bakalım bir çözüm bulursam yazarım.

 
Gönderildi : 14/08/2013 1:15 pm
 ufuk
(@ufuk)
Gönderiler: 49
Trusted Member
 

Birinin çözülmesine sevindim 🙂
Acaba variant değeri belirtilmediği için belirtilsin diye bekleme mi yapıyor?

    Option "XkbModel" "pc105"
    Option "XkbLayout" "tr"
    Option "XkbVariant" ""

Variant F olmadığını da belirtin lütfen.

 
Gönderildi : 14/08/2013 1:47 pm
(@cokomoko)
Gönderiler: 76
Trusted Member
Konu başlatıcı
 

Maalesef yine olmadı:

[    18.044] (**) Option "xkb_rules" "evdev"
[    18.044] (**) Option "xkb_model" "pc105"
[    18.044] (**) Option "xkb_layout" "tr"
[    18.044] (WW) Option "xkb_variant" requires a string value
[    32.458] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    32.458] (II) NVIDIA(GPU-0):     Vision stereo.

Bir de şimdi ekran kartı sıcaklığı 60 dereceye çıkmaya başladı. Aşağıya inmiyor, bugüne kadar hep 49 derece ve civarında seyrediyordu. Galiba yaptığımız değişiklikten oldu, onun için o satırı mecburen siliyorum.

 
Gönderildi : 14/08/2013 1:53 pm
 ufuk
(@ufuk)
Gönderiler: 49
Trusted Member
 
Option "XkbVariant" "q"

deyin. Bende sıcaklık ve performansta hiçbir değişiklik olmadığı için paylaştım.

 
Gönderildi : 14/08/2013 2:10 pm
(@cokomoko)
Gönderiler: 76
Trusted Member
Konu başlatıcı
 

Yine olmadi, ustelik kilavyemde turkce karakter yazamiyorum

[    18.401] (**) Option "xkb_rules" "evdev"
[    18.401] (**) Option "xkb_model" "pc105"
[    18.401] (**) Option "xkb_layout" "tr"
[    18.401] (**) Option "xkb_variant" "q"
[    35.423] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    35.423] (II) NVIDIA(GPU-0):     Vision stereo.
 
Gönderildi : 14/08/2013 2:35 pm
(@cokomoko)
Gönderiler: 76
Trusted Member
Konu başlatıcı
 

Bu sorunla ilgili bilgi geçeyim, sorun çözülmedi ama bu yüzden Manjaro xfce ve sıfırdan bir tane daha Arch kurdum; ikisinde de aynı sorun var, ikisi de aynı yerlerde bekliyor.
Arch'ta ilk önce lxde kurdum, nvidia ekran kartı kurmadan açılış 10sn idi ve Xorg.log çıktısında uzun bir bekleme yoktu. Ta ki nvidia kurana kadar, nvidia kurduktan sonra 15sn. de masaüstü geliyordu, sonra bir daha kapatıp açınca 20sn.yi geçmeye başladı, bu süre her açılışta uzamaya başladı.Yukarıda verdiğim çıktılardaki gibi nvidia ve klavye yapılandırması ile ilgili aynı yerde bekliyor.
Sonra Manjaro xfce rc2a 64bit kurdum, kurulum sonrası açılış 20sn. idi, sonra her açılışta bu oran arttı ve en son açışımda 40sn.yi geçen bir şekilde masaüstü geldi.Onda da Xorg.log çıktısında aynı yerlerde bekliyordu. Çok garip 🙄
Makine'de kurulu olan Ubuntu 12.04'de açılış 28sn. nvidia ilgili satırlarda bekleme yok ve onda da klavye yapılandırması ile ilgili yerde bekliyor ama sadece 2-3sn.Buyrun:

[    23.527] (**) Option "xkb_layout" "tr"
[    25.853] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D

Konuyla ilgili bilgilendirmelerim devam edecek.

 
Gönderildi : 16/08/2013 10:25 am
(@cokomoko)
Gönderiler: 76
Trusted Member
Konu başlatıcı
 

Az önce sıfırdan yine bir Arch daha kurdum, bu kez sadece openbox+nvidia kurdum,sonuçlar şöyle; artık kesin olarak nvidia'da beklediği kesin, klavye yapılandırması ile ilgili bölümde ise beklemiyor, açılış ortalama 20-22 sn.(galiba 5400rpm hdd ile ancak bu kadar hızlı açılabilir, bu halde xfce+nvidia'nın 38sn.'de açılmasına şaşmamalı).

Beklediği yer:

[    13.703] (**) NVIDIA(0): Enabling 2D acceleration
[    17.017] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)

Xorg.log çıktısı:

[    12.550] 
X.Org X Server 1.14.2
Release Date: 2013-06-25
[    12.551] X Protocol Version 11, Revision 0
[    12.551] Build Operating System: Linux 3.9.7-1-ARCH x86_64 
[    12.551] Current Operating System: Linux cokomoko 3.10.6-2-ARCH #1 SMP PREEMPT Tue Aug 13 09:47:01 CEST 2013 x86_64
[    12.551] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=ff692e38-a242-405c-8a1a-57d64d30b810 rw quiet
[    12.551] Build Date: 01 July 2013  10:48:42AM
[    12.551]  
[    12.551] Current version of pixman: 0.30.2
[    12.551] 	Before reporting problems, check  http://wiki.x.org 
	to make sure that you have the latest version.
[    12.551] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    12.551] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 16 16:52:08 2013
[    12.577] (==) Using config file: "/etc/X11/xorg.conf"
[    12.577] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    12.607] (==) ServerLayout "Layout0"
[    12.607] (**) |-->Screen "Screen0" (0)
[    12.607] (**) |   |-->Monitor "Monitor0"
[    12.608] (**) |   |-->Device "Device0"
[    12.608] (**) |-->Input Device "Keyboard0"
[    12.608] (**) |-->Input Device "Mouse0"
[    12.608] (==) Automatically adding devices
[    12.608] (==) Automatically enabling devices
[    12.608] (==) Automatically adding GPU devices
[    12.632] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    12.632] 	Entry deleted from font path.
[    12.632] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    12.632] 	Entry deleted from font path.
[    12.632] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    12.632] 	Entry deleted from font path.
[    12.633] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    12.633] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    12.633] 	Entry deleted from font path.
[    12.633] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    12.633] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/
[    12.633] (==) ModulePath set to "/usr/lib/xorg/modules"
[    12.633] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    12.633] (WW) Disabling Keyboard0
[    12.633] (WW) Disabling Mouse0
[    12.648] (II) Loader magic: 0x7fdc20
[    12.648] (II) Module ABI versions:
[    12.648] 	X.Org ANSI C Emulation: 0.4
[    12.648] 	X.Org Video Driver: 14.1
[    12.648] 	X.Org XInput driver : 19.1
[    12.648] 	X.Org Server Extension : 7.0
[    12.649] (II) xfree86: Adding drm device (/dev/dri/card0)
[    12.654] (--) PCI:*(0:1:0:0) 10de:0a28:1179:ff00 rev 162, Mem @ 0xf3000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[    12.661] Initializing built-in extension Generic Event Extension
[    12.662] Initializing built-in extension SHAPE
[    12.662] Initializing built-in extension MIT-SHM
[    12.662] Initializing built-in extension XInputExtension
[    12.662] Initializing built-in extension XTEST
[    12.662] Initializing built-in extension BIG-REQUESTS
[    12.662] Initializing built-in extension SYNC
[    12.662] Initializing built-in extension XKEYBOARD
[    12.662] Initializing built-in extension XC-MISC
[    12.662] Initializing built-in extension SECURITY
[    12.662] Initializing built-in extension XINERAMA
[    12.662] Initializing built-in extension XFIXES
[    12.662] Initializing built-in extension RENDER
[    12.662] Initializing built-in extension RANDR
[    12.662] Initializing built-in extension COMPOSITE
[    12.662] Initializing built-in extension DAMAGE
[    12.662] Initializing built-in extension MIT-SCREEN-SAVER
[    12.662] Initializing built-in extension DOUBLE-BUFFER
[    12.662] Initializing built-in extension RECORD
[    12.662] Initializing built-in extension DPMS
[    12.662] Initializing built-in extension X-Resource
[    12.662] Initializing built-in extension XVideo
[    12.662] Initializing built-in extension XVideo-MotionCompensation
[    12.662] Initializing built-in extension XFree86-VidModeExtension
[    12.662] Initializing built-in extension XFree86-DGA
[    12.662] Initializing built-in extension XFree86-DRI
[    12.662] Initializing built-in extension DRI2
[    12.662] (II) LoadModule: "glx"
[    12.678] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    13.367] (II) Module glx: vendor="NVIDIA Corporation"
[    13.367] 	compiled for 4.0.2, module version = 1.0.0
[    13.367] 	Module class: X.Org Server Extension
[    13.367] (II) NVIDIA GLX Module  325.15  Wed Jul 31 18:12:00 PDT 2013
[    13.379] Loading extension GLX
[    13.380] (II) LoadModule: "nvidia"
[    13.390] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    13.488] (II) Module nvidia: vendor="NVIDIA Corporation"
[    13.488] 	compiled for 4.0.2, module version = 1.0.0
[    13.488] 	Module class: X.Org Video Driver
[    13.494] (II) NVIDIA dlloader X Driver  325.15  Wed Jul 31 17:50:57 PDT 2013
[    13.494] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    13.495] (++) using VT number 7

[    13.668] (II) Loading sub module "fb"
[    13.668] (II) LoadModule: "fb"
[    13.669] (II) Loading /usr/lib/xorg/modules/libfb.so
[    13.689] (II) Module fb: vendor="X.Org Foundation"
[    13.690] 	compiled for 1.14.2, module version = 1.0.0
[    13.690] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    13.690] (WW) Unresolved symbol: fbGetGCPrivateKey
[    13.690] (II) Loading sub module "wfb"
[    13.690] (II) LoadModule: "wfb"
[    13.691] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    13.693] (II) Module wfb: vendor="X.Org Foundation"
[    13.693] 	compiled for 1.14.2, module version = 1.0.0
[    13.694] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    13.694] (II) Loading sub module "shadow"
[    13.694] (II) LoadModule: "shadow"
[    13.694] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    13.695] (II) Module shadow: vendor="X.Org Foundation"
[    13.695] 	compiled for 1.14.2, module version = 1.1.0
[    13.695] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    13.695] (II) Loading sub module "ramdac"
[    13.695] (II) LoadModule: "ramdac"
[    13.696] (II) Module "ramdac" already built-in
[    13.702] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    13.702] (==) NVIDIA(0): RGB weight 888
[    13.702] (==) NVIDIA(0): Default visual is TrueColor
[    13.702] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    13.703] (**) NVIDIA(0): Enabling 2D acceleration
[    17.017] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[    17.034] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    17.034] (II) NVIDIA(GPU-0):     Vision stereo.
[    17.035] (II) NVIDIA(0): NVIDIA GPU GeForce GT 230M (GT216) at PCI:1:0:0 (GPU-0)
[    17.035] (--) NVIDIA(0): Memory: 1048576 kBytes
[    17.035] (--) NVIDIA(0): VideoBIOS: 70.16.27.00.14
[    17.035] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    17.042] (--) NVIDIA(0): Valid display device(s) on GeForce GT 230M at PCI:1:0:0
[    17.042] (--) NVIDIA(0):     CRT-0
[    17.042] (--) NVIDIA(0):     Seiko/Epson (DFP-0) (boot, connected)
[    17.042] (--) NVIDIA(0):     DFP-1
[    17.042] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    17.042] (--) NVIDIA(0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
[    17.042] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal Dual Link LVDS
[    17.042] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[    17.042] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    17.042] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    17.042] (**) NVIDIA(0):     device Seiko/Epson (DFP-0) (Using EDID frequencies has
[    17.042] (**) NVIDIA(0):     been enabled on all display devices.)
[    17.044] (==) NVIDIA(0): 
[    17.044] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    17.044] (==) NVIDIA(0):     will be used as the requested mode.
[    17.044] (==) NVIDIA(0): 
[    17.044] (II) NVIDIA(0): Validated MetaModes:
[    17.044] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select{}"
[    17.044] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
[    18.134] (--) NVIDIA(0): DPI set to (99, 97); computed from "UseEdidDpi" X config
[    18.134] (--) NVIDIA(0):     option
[    18.134] (--) Depth 24 pixmap format is 32 bpp
[    18.135] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    18.160] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    18.161] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    18.161] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    18.161] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    18.161] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    18.161] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    18.161] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    18.161] (II) NVIDIA(0):     Config Options in the README.
[    18.170] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select{}"
[    18.530] Loading extension NV-GLX
[    18.600] (==) NVIDIA(0): Disabling shared memory pixmaps
[    18.600] (==) NVIDIA(0): Backing store disabled
[    18.600] (==) NVIDIA(0): Silken mouse enabled
[    18.601] (**) NVIDIA(0): DPMS enabled
[    18.601] Loading extension NV-CONTROL
[    18.602] Loading extension XINERAMA
[    18.602] (II) Loading sub module "dri2"
[    18.602] (II) LoadModule: "dri2"
[    18.602] (II) Module "dri2" already built-in
[    18.602] (II) NVIDIA(0): [DRI2] Setup complete
[    18.602] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    18.603] (--) RandR disabled
[    18.614] (II) Initializing extension GLX
[    19.044] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    19.044] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    19.044] (II) LoadModule: "evdev"
[    19.044] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.066] (II) Module evdev: vendor="X.Org Foundation"
[    19.066] 	compiled for 1.14.2, module version = 2.8.1
[    19.066] 	Module class: X.Org XInput Driver
[    19.066] 	ABI class: X.Org XInput driver, version 19.1
[    19.066] (II) Using input driver 'evdev' for 'Power Button'
[    19.066] (**) Power Button: always reports core events
[    19.066] (**) evdev: Power Button: Device: "/dev/input/event5"
[    19.066] (--) evdev: Power Button: Vendor 0 Product 0x1
[    19.066] (--) evdev: Power Button: Found keys
[    19.066] (II) evdev: Power Button: Configuring as keyboard
[    19.066] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[    19.066] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    19.066] (**) Option "xkb_rules" "evdev"
[    19.066] (**) Option "xkb_model" "pc104"
[    19.066] (**) Option "xkb_layout" "tr"
[    19.128] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    19.128] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    19.128] (II) Using input driver 'evdev' for 'Video Bus'
[    19.128] (**) Video Bus: always reports core events
[    19.128] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    19.128] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    19.128] (--) evdev: Video Bus: Found keys
[    19.128] (II) evdev: Video Bus: Configuring as keyboard
[    19.128] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6/event6"
[    19.128] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    19.128] (**) Option "xkb_rules" "evdev"
[    19.128] (**) Option "xkb_model" "pc104"
[    19.128] (**) Option "xkb_layout" "tr"
[    19.129] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    19.129] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    19.129] (II) Using input driver 'evdev' for 'Power Button'
[    19.129] (**) Power Button: always reports core events
[    19.129] (**) evdev: Power Button: Device: "/dev/input/event4"
[    19.129] (--) evdev: Power Button: Vendor 0 Product 0x1
[    19.129] (--) evdev: Power Button: Found keys
[    19.129] (II) evdev: Power Button: Configuring as keyboard
[    19.129] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[    19.129] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    19.130] (**) Option "xkb_rules" "evdev"
[    19.130] (**) Option "xkb_model" "pc104"
[    19.130] (**) Option "xkb_layout" "tr"
[    19.131] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    19.131] (II) No input driver specified, ignoring this device.
[    19.131] (II) This device may have been added with another device file.
[    19.131] (II) config/udev: Adding drm device (/dev/dri/card0)
[    19.131] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[    19.131] (II) No input driver specified, ignoring this device.
[    19.131] (II) This device may have been added with another device file.
[    19.132] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[    19.132] (II) No input driver specified, ignoring this device.
[    19.132] (II) This device may have been added with another device file.
[    19.132] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[    19.132] (II) No input driver specified, ignoring this device.
[    19.132] (II) This device may have been added with another device file.
[    19.133] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[    19.133] (II) No input driver specified, ignoring this device.
[    19.133] (II) This device may have been added with another device file.
[    19.133] (II) config/udev: Adding input device USB 2.0 HD Camera  (/dev/input/event12)
[    19.133] (**) USB 2.0 HD Camera : Applying InputClass "evdev keyboard catchall"
[    19.133] (II) Using input driver 'evdev' for 'USB 2.0 HD Camera '
[    19.133] (**) USB 2.0 HD Camera : always reports core events
[    19.133] (**) evdev: USB 2.0 HD Camera : Device: "/dev/input/event12"
[    19.133] (--) evdev: USB 2.0 HD Camera : Vendor 0x64e Product 0xc117
[    19.133] (--) evdev: USB 2.0 HD Camera : Found keys
[    19.133] (II) evdev: USB 2.0 HD Camera : Configuring as keyboard
[    19.134] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input12/event12"
[    19.134] (II) XINPUT: Adding extended input device "USB 2.0 HD Camera " (type: KEYBOARD, id 9)
[    19.134] (**) Option "xkb_rules" "evdev"
[    19.134] (**) Option "xkb_model" "pc104"
[    19.134] (**) Option "xkb_layout" "tr"
[    19.134] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[    19.134] (II) No input driver specified, ignoring this device.
[    19.134] (II) This device may have been added with another device file.
[    19.135] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[    19.135] (II) No input driver specified, ignoring this device.
[    19.135] (II) This device may have been added with another device file.
[    19.135] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[    19.135] (II) No input driver specified, ignoring this device.
[    19.135] (II) This device may have been added with another device file.
[    19.136] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[    19.136] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    19.136] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    19.136] (**) Logitech USB Receiver: always reports core events
[    19.136] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[    19.136] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[    19.136] (--) evdev: Logitech USB Receiver: Found keys
[    19.136] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    19.136] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input1/event1"
[    19.136] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[    19.136] (**) Option "xkb_rules" "evdev"
[    19.136] (**) Option "xkb_model" "pc104"
[    19.136] (**) Option "xkb_layout" "tr"
[    19.137] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[    19.137] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    19.137] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    19.137] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    19.137] (**) Logitech USB Receiver: always reports core events
[    19.138] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[    19.138] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[    19.138] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[    19.138] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    19.138] (--) evdev: Logitech USB Receiver: Found relative axes
[    19.138] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    19.138] (--) evdev: Logitech USB Receiver: Found absolute axes
[    19.138] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[    19.138] (--) evdev: Logitech USB Receiver: Found keys
[    19.138] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    19.138] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    19.138] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    19.138] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    19.138] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    19.138] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.1/input/input2/event2"
[    19.138] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[    19.138] (**) Option "xkb_rules" "evdev"
[    19.138] (**) Option "xkb_model" "pc104"
[    19.138] (**) Option "xkb_layout" "tr"
[    19.138] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    19.138] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    19.139] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    19.139] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    19.139] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    19.139] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    19.139] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    19.139] (II) No input driver specified, ignoring this device.
[    19.139] (II) This device may have been added with another device file.
[    19.140] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    19.140] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    19.140] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    19.140] (**) AT Translated Set 2 keyboard: always reports core events
[    19.140] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    19.140] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    19.140] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    19.140] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    19.140] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    19.140] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    19.140] (**) Option "xkb_rules" "evdev"
[    19.140] (**) Option "xkb_model" "pc104"
[    19.140] (**) Option "xkb_layout" "tr"
[    19.141] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event17)
[    19.141] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    19.141] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[    19.141] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    19.141] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event17"
[    19.141] (II) evdev: SynPS/2 Synaptics TouchPad: Using mtdev for this device
[    19.141] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    19.141] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[    19.141] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[    19.141] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
[    19.141] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[    19.141] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[    19.141] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[    19.141] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[    19.142] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    19.142] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input17/event17"
[    19.142] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    19.142] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[    19.142] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    19.142] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[    19.142] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    19.142] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    19.142] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    19.143] (II) No input driver specified, ignoring this device.
[    19.143] (II) This device may have been added with another device file.
[    19.143] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[    19.143] (II) No input driver specified, ignoring this device.
[    19.143] (II) This device may have been added with another device file.
[    19.144] (II) config/udev: Adding input device Toshiba input device (/dev/input/event7)
[    19.144] (**) Toshiba input device: Applying InputClass "evdev keyboard catchall"
[    19.144] (II) Using input driver 'evdev' for 'Toshiba input device'
[    19.144] (**) Toshiba input device: always reports core events
[    19.144] (**) evdev: Toshiba input device: Device: "/dev/input/event7"
[    19.144] (--) evdev: Toshiba input device: Vendor 0 Product 0
[    19.144] (--) evdev: Toshiba input device: Found keys
[    19.144] (II) evdev: Toshiba input device: Configuring as keyboard
[    19.144] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[    19.144] (II) XINPUT: Adding extended input device "Toshiba input device" (type: KEYBOARD, id 14)
[    19.144] (**) Option "xkb_rules" "evdev"
[    19.144] (**) Option "xkb_model" "pc104"
[    19.144] (**) Option "xkb_layout" "tr"

systemd çıktısı:

[root@cokomoko cokomoko]# systemd-analyze 
Startup finished in 3.960s (kernel) + 7.855s (userspace) = 11.815s
[root@cokomoko cokomoko]# systemd-analyze blame
          1.711s systemd-vconsole-setup.service
          1.184s systemd-logind.service
           725ms systemd-update-utmp.service
           706ms dhcpcd.service
           571ms sys-kernel-config.mount
           570ms dev-mqueue.mount
           553ms systemd-remount-fs.service
           546ms dev-hugepages.mount
           545ms systemd-tmpfiles-setup-dev.service
           545ms sys-kernel-debug.mount
           494ms tmp.mount
           258ms systemd-user-sessions.service
           242ms systemd-udev-trigger.service
           239ms systemd-sysctl.service
           168ms systemd-udevd.service
           161ms systemd-tmpfiles-setup.service
           107ms systemd-journal-flush.service
            79ms systemd-random-seed-load.service
            39ms dev-sda7.swap
            12ms alsa-restore.service
 
Gönderildi : 16/08/2013 1:19 pm
Sayfa 2 / 2
Paylaş:
Translate »