0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.

/dev/sda1: UUID="7097-A0BD" TYPE="vfat" PARTUUID="3b766671-49e0-4e3c-9aff-0c7968f5d256"
/dev/sda2: UUID="e2f64f67-996e-4d00-9b69-ffd9431977d3" TYPE="ext4" PARTUUID="b17c2a89-008a-4e0f-9eb3-a29e616c2e7d"
/dev/sda3: UUID="a207a97d-6412-43d5-bf32-7c91520644bd" TYPE="swap" PARTUUID="10b24c78-f750-4d8f-a202-cb8e43f9af89"

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
# <file system>                           <mount point>  <type>  <options>  <dump>  <pass>
UUID=7097-A0BD                            /boot/efi      vfat    defaults,noatime 0       2
UUID=e2f64f67-996e-4d00-9b69-ffd9431977d3 /              ext4    defaults,noatime 0       1
UUID=a207a97d-6412-43d5-bf32-7c91520644bd swap           swap    defaults,noatime 0       0
UUID=                                     swap           swap    defaults,noatime 0       0

GRUB_DEFAULT=saved
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Manjaro"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# If you want to enable the save default function, uncomment the following
# line, and set GRUB_DEFAULT to saved.
GRUB_SAVEDEFAULT=true

# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"

# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true

# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console

# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto

# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep

# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true

# Uncomment and set to the desired menu colors.  Used by normal and wallpaper
# modes only.  Entries specified as foreground/background.
GRUB_COLOR_NORMAL="light-gray/black"
GRUB_COLOR_HIGHLIGHT="green/black"

# Uncomment one of them for the gfx desired, a image background or a gfxtheme
GRUB_BACKGROUND="/usr/share/grub/background.png"
#GRUB_THEME="/path/to/gfxtheme"

# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"

Linux muhammet-pc 4.1.13-1-MANJARO #1 SMP PREEMPT Tue Nov 10 22:11:15 UTC 2015 x86_64 GNU/Linux

Startup finished in 3.461s (firmware) + 3.767s (loader) + 3.103s (kernel) + 3min 2.069s (userspace) = 3min 12.401s

9.377s dev-sda2.device
          4.372s systemd-journal-flush.service
          3.693s systemd-journald.service
          3.548s NetworkManager.service
          3.372s plymouth-quit-wait.service
          3.368s lightdm-plymouth.service
          2.889s ModemManager.service
          2.436s bluetooth.service
          1.860s systemd-vconsole-setup.service
          1.493s avahi-daemon.service
          1.247s systemd-udevd.service
          1.154s polkit.service
           920ms tmp.mount
           828ms systemd-tmpfiles-setup-dev.service
           810ms systemd-binfmt.service
           799ms [email protected]
           777ms systemd-remount-fs.service
           774ms dev-mqueue.mount
           774ms dev-hugepages.mount
           764ms systemd-sysctl.service
           559ms dev-sda3.swap
           542ms sys-kernel-debug.mount
           536ms sys-kernel-config.mount

Eski üyeliğimin şifresini hatırlayamadım. Kurtarma maili de bir türlü gelmedi. O yüzden yeni bir üyelik alıp yazdım Kusura bakmayın.

şeklinde düzenleyelim.

nano /etc/systemd/journald.conf

[Journal]
Storage=persistent
Compress=yes
Seal=yes
#SplitMode=uid
#SyncIntervalSec=5m
#RateLimitInterval=30s
#RateLimitBurst=1000
SystemMaxUse=5M
#SystemKeepFree=
#SystemMaxFileSize=
RuntimeMaxUse=10M
#RuntimeKeepFree=
#RuntimeMaxFileSize=
#MaxRetentionSec=
#MaxFileSec=1month
ForwardToSyslog=yes
#ForwardToKMsg=no
#ForwardToConsole=no
#ForwardToWall=yes
#TTYPath=/dev/console
#MaxLevelStore=debug
#MaxLevelSyslog=debug
#MaxLevelKMsg=notice
#MaxLevelConsole=info
#MaxLevelWall=emerg

Değişen bir şey olmadı malesef.

yeniden başlattınız mı? başlatıp çıktı geçin bakalım

systemd-analyze

systemd-analyze blame

Startup finished in 3.894s (firmware) + 5.830s (loader) + 3.169s (kernel) + 3min 2.128s (userspace) = 3min 15.023s

9.161s systemd-journald.service
          3.389s dev-sda2.device
          2.610s systemd-journal-flush.service
          2.556s alsa-restore.service
          2.555s NetworkManager.service
          2.551s systemd-user-sessions.service
          2.548s avahi-daemon.service
          2.488s plymouth-quit-wait.service
          2.486s lightdm-plymouth.service
          1.732s ModemManager.service
          1.331s systemd-vconsole-setup.service
          1.311s [email protected]
          1.103s accounts-daemon.service
           788ms systemd-backlight@backlight:intel_backlight.service
           762ms systemd-binfmt.service
           683ms polkit.service
           614ms systemd-udevd.service
           501ms sys-kernel-debug.mount
           482ms systemd-tmpfiles-setup-dev.service
           475ms systemd-sysctl.service
           446ms systemd-rfkill.service
           427ms dev-sda3.swap
           421ms systemd-remount-fs.service

Sistem başlarken şu  3 satır gözüme çarptı. Faydası olur mu bilmiyorum

[ TIME ] Timed out waiting for device dev-disk-byx2duu.id.device.
[ DEPEND ] Dependency failed for /dev/disk/by-uuid.
[ DEPEND ] Dependency failed for Swap.

/etc/fstab içeriğini şöyle yapalım

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
# <file system>                           <mount point>  <type>  <options>  <dump>  <pass>
UUID=7097-A0BD                            /boot/efi      vfat    defaults,noatime 0       2
UUID=e2f64f67-996e-4d00-9b69-ffd9431977d3 /              ext4    defaults,noatime 0       1
UUID=a207a97d-6412-43d5-bf32-7c91520644bd swap           swap    defaults,noatime 0       0

Bu sefer oldu. Zaman ayırıp yardımcı olduğunuz için çok teşekkür ederim.

5.767s dev-sda2.device
          3.972s ModemManager.service
          2.757s systemd-logind.service
          2.748s alsa-restore.service
          2.736s NetworkManager.service
          2.731s avahi-daemon.service
          2.729s bluetooth.service
          1.879s systemd-journald.service
          1.803s accounts-daemon.service
          1.794s plymouth-quit-wait.service
          1.793s lightdm-plymouth.service
          1.565s systemd-vconsole-setup.service
          1.379s [email protected]
          1.071s systemd-tmpfiles-setup-dev.service
           860ms systemd-modules-load.service
           784ms systemd-binfmt.service
           763ms systemd-udevd.service
           647ms systemd-remount-fs.service
           585ms systemd-rfkill.service
           580ms systemd-random-seed.service
           511ms tmp.mount
           488ms dev-hugepages.mount
           438ms dev-mqueue.mount

Startup finished in 3.456s (firmware) + 3.608s (loader) + 3.157s (kernel) + 13.769s (userspace) = 23.992s

rica ederim. Güle güle kullanın Ayrıca, sık kullandığın yerler için (ev gibi), ağ ayarlarını elle yapılandırarak süre kısalabilir, fakat ben gerek görmüyorum açılış çok kötü sayılmaz .konu sizin için çözüldü ise ne mutlu