eski versiyon manjaro 15 te çalışıyordu ancak yeni versiyonu yükledim bu modülü çalıştıramadım aygıtı taktığımda başlattaki wireless menüsündede aygıt yönetilemiyor diyor:

buyrun dmesg çıktısı:

[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] Movable zone start for each node
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.020035] mce: CPU supports 7 MCE banks
[    0.159385] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.175208] ACPI : EC: EC started
[    0.249052] ACPI: (supports S0 S3 S4 S5)
[    0.249071] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.272379] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.272564] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.272669] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.273051] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.273383] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.273509] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.273656] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.273784] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.273893] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.274025] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.274156] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.274326] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.274593] pci 0000:00:1f.2: PME# supported from D3hot
[    0.275199] pci 0000:03:00.0: supports D1 D2
[    0.275201] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.281878] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.542731] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.543081] Linux agpgart interface v0.103
[    0.543316] rtc_cmos 00:01: RTC can wake from S4
[    0.543426] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.543450] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.545848] Loading compiled-in X.509 certificates
[    0.547255] rtc_cmos 00:01: setting system clock to 2016-06-19 12:24:26 UTC (1466339066)
[    0.608351] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.608418] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.608471] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.608520] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.608573] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.614444] ehci-pci 0000:00:1a.0: debug port 2
[    0.618359] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.626131] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.626358] hub 1-0:1.0: 2 ports detected
[    0.626673] ehci-pci 0000:00:1d.0: debug port 2
[    0.630565] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.639449] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.639624] hub 2-0:1.0: 2 ports detected
[    0.641007] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.641248] hub 3-0:1.0: 14 ports detected
[    0.643554] hub 4-0:1.0: 4 ports detected
[    0.644346] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x30 impl SATA mode
[    0.644349] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
[    0.650499] ata5: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a300 irq 26
[    0.650501] ata6: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a380 irq 26
[    0.993053] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.060147] hub 1-1:1.0: 6 ports detected
[    1.073518] hub 2-1:1.0: 8 ports detected
[    4.117456] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.166069] systemd[1]: Starting Set Up Additional Binary Formats...
[    4.166465] systemd[1]: Starting Journal Service...
[    4.166768] systemd[1]: Starting Setup Virtual Console...
[    4.167264] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    4.206016] systemd[1]: Starting Load Kernel Modules...
[    4.206697] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.294385] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    4.523372] systemd[1]: Started Remount Root and Kernel File Systems.
[    4.542646] systemd[1]: Starting Load/Save Random Seed...
[    4.662719] systemd[1]: Starting udev Coldplug all Devices...
[    4.663128] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.663431] systemd[1]: Started Set Up Additional Binary Formats.
[    4.918401] systemd[1]: Started udev Coldplug all Devices.
[    4.955544] systemd[1]: Started Create Static Device Nodes in /dev.
[    4.972637] systemd[1]: Starting udev Kernel Device Manager...
[    4.973015] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
[    5.088332] systemd[1]: Started Tell Plymouth To Write Out Runtime Data.
[    5.109311] systemd[1]: Started Load/Save Random Seed.
[    5.321746] RPC: Registered named UNIX socket transport module.
[    5.321748] RPC: Registered udp transport module.
[    5.321749] RPC: Registered tcp transport module.
[    5.321749] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.448505] systemd[1]: Started Load Kernel Modules.
[    5.459305] systemd[1]: Starting Apply Kernel Variables...
[    5.471258] systemd[1]: Started Setup Virtual Console.
[    5.471741] systemd[1]: Starting Show Plymouth Boot Screen...
[    5.592904] systemd[1]: Started Apply Kernel Variables.
[    5.986031] systemd[1]: Started udev Kernel Device Manager.
[    6.325409] EDAC ie31200: No ECC support
[    7.245563] toshiba_acpi: Supported laptop features: touchpad usb-sleep-charge usb-rapid-charge special-function-keys panel-power-on usb3
[    7.560174] input: Toshiba WMI hotkeys as /devices/virtual/input/input15
[    7.584522] iTCO_vendor_support: vendor-support=0
[    7.625898] systemd[1]: Starting Load/Save RF Kill Switch Status...
[    7.626325] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    7.626327] [drm] Driver supports precise vblank timestamp query.
[    7.812527] systemd[1]: Started Load/Save RF Kill Switch Status.
[    7.884719] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.205897] systemd[1]: Started Show Plymouth Boot Screen.
[    8.206001] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[    8.206030] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    8.693484] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    8.962462] systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:intel_backlight...
[    9.036089] systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:intel_backlight.
[    9.385824] systemd[1]: Started Journal Service.
[   40.796532] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[   40.806286] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0005 detected
[   40.806989] usbcore: registered new interface driver rt2800usb
[   40.830619] rt2800usb 3-2:1.0 wlp0s20u2: renamed from wlan0
[   40.850338] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[   40.898667] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[   42.457180] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   50.431678] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[   50.441786] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 0005 detected
[   51.976531] rt2800usb 3-2:1.0 wlp0s20u2: renamed from wlan0
[   52.010850] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[   52.010877] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[   52.243183] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19
[  161.744131] ieee80211 phy3: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  161.754124] ieee80211 phy3: rt2x00_set_rf: Info - RF chipset 0005 detected
[  163.275023] rt2800usb 3-2:1.0 wlp0s20u2: renamed from wlan0
[  163.295110] ieee80211 phy3: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  163.295132] ieee80211 phy3: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[  163.532287] ieee80211 phy3: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19
[  402.070110] ieee80211 phy4: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  402.080449] ieee80211 phy4: rt2x00_set_rf: Info - RF chipset 0005 detected
[  403.614810] rt2800usb 3-2:1.0 wlp0s20u2: renamed from wlan0
[  403.642765] ieee80211 phy4: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  403.642794] ieee80211 phy4: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[  403.875706] ieee80211 phy4: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19
[ 1133.019314] ieee80211 phy5: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 1133.029309] ieee80211 phy5: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 1134.559797] rt2800usb 3-2:1.0 wlp0s20u2: renamed from wlan0
[ 1134.581523] ieee80211 phy5: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 1134.581577] ieee80211 phy5: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 1134.821734] ieee80211 phy5: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -19
[ 1169.926928] ieee80211 phy6: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 1169.936823] ieee80211 phy6: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 1171.473459] rt2800usb 3-2:1.0 wlp0s20u2: renamed from wlan0
[ 1171.497666] ieee80211 phy6: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 1171.497689] ieee80211 phy6: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 1182.012260] ieee80211 phy7: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1182.012264] ieee80211 phy7: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1182.012266] ieee80211 phy7: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1255.270772] ieee80211 phy8: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1255.270777] ieee80211 phy8: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1255.270778] ieee80211 phy8: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1261.180532] ieee80211 phy9: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1261.180540] ieee80211 phy9: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1261.180544] ieee80211 phy9: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1263.126985] ieee80211 phy10: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1263.126990] ieee80211 phy10: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1263.126991] ieee80211 phy10: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1270.006543] ieee80211 phy11: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1270.006548] ieee80211 phy11: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1270.006551] ieee80211 phy11: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1277.333523] ieee80211 phy12: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 1277.343552] ieee80211 phy12: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 1302.325276] ieee80211 phy13: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 1302.335314] ieee80211 phy13: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 1303.591849] ieee80211 phy14: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 1303.601905] ieee80211 phy14: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 1322.379875] usb 3-2: unable to read config index 0 descriptor/start: -110
[ 1352.637966] ieee80211 phy15: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1352.637978] ieee80211 phy15: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1352.637985] ieee80211 phy15: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1361.203994] ieee80211 phy16: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1361.203998] ieee80211 phy16: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1361.204000] ieee80211 phy16: rt2x00lib_probe_dev: Error - Failed to allocate device