Şu komutla gelen tüm sorulara Yes cevabını verin;

sudo sensors-detect

ardından şu komutu verip sistemi yeniden başlatın.

sudo systemctl --global enable lm_sensors.service

Bu şekilde çalışması gerekiyor.

Şu komutla gelen tüm sorulara Yes cevabını verin;

sudo sensors-detect

ardından şu komutu verip sistemi yeniden başlatın.

sudo systemctl --global enable lm_sensors.service

Bu şekilde çalışması gerekiyor.

Malesef şu çıktıyı aldım : Failed to enable unit, unit lm_sensors.service does not exist.

[anakin@anakin-pc ~]$ sudo sensors-detect
[sudo] password for anakin: 
# sensors-detect revision $Revision$
# Board: ASUSTeK COMPUTER INC. M5A99FX PRO R2.0
# Kernel: 4.9.44-1-MANJARO x86_64
# Processor: AMD FX(tm)-8350 Eight-Core Processor (21/2/0)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): y
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
AMD Family 12h and 14h thermal sensors...                   No
AMD Family 15h thermal sensors...                           Success!
    (driver `k10temp')
AMD Family 16h thermal sensors...                           No
AMD Family 15h power sensors...                             Success!
    (driver `fam15h_power')
AMD Family 16h power sensors...                             No
Intel digital thermal sensor...                             No
Intel AMB FB-DIMM thermal sensor...                         No
Intel 5500/5520/X58 thermal sensor...                       No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No                                                        
Trying family `ITE'...                                      Yes                                                       
Found `ITE IT8721F/IT8758E Super IO Sensors'                Success!                                                  
    (address 0x290, driver `it87')                                                                                    
Probing for Super-I/O at 0x4e/0x4f                                                                                    
Trying family `National Semiconductor/ITE'...               No                                                        
Trying family `SMSC'...                                     No                                                        
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No

Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): y
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): y
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): y
Using driver `i2c-piix4' for device 0000:00:14.0: ATI Technologies Inc SB600/SB700/SB800 SMBus
Module i2c-dev loaded successfully.

Next adapter: SMBus PIIX4 adapter port 0 at 0b00 (i2c-0)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x50
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 Yes
    (confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'...                                No
Client found at address 0x52
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 Yes
    (confidence 8, not a hardware monitoring chip)

Next adapter: SMBus PIIX4 adapter port 2 at 0b00 (i2c-1)
Do you want to scan it? (YES/no/selectively): y

Next adapter: SMBus PIIX4 adapter port 3 at 0b00 (i2c-2)
Do you want to scan it? (YES/no/selectively): 

Next adapter: SMBus PIIX4 adapter port 4 at 0b00 (i2c-3)
Do you want to scan it? (YES/no/selectively): y

Next adapter: SMBus PIIX4 adapter port 1 at 0b20 (i2c-4)
Do you want to scan it? (YES/no/selectively): y


Now follows a summary of the probes I have just done.
Just press ENTER to continue: 

Driver `k10temp' (autoloaded):
  * Chip `AMD Family 15h thermal sensors' (confidence: 9)

Driver `it87':
  * ISA bus, address 0x290
    Chip `ITE IT8721F/IT8758E Super IO Sensors' (confidence: 9)

Driver `fam15h_power' (autoloaded):
  * Chip `AMD Family 15h power sensors' (confidence: 9)

Do you want to overwrite /etc/conf.d/lm_sensors? (YES/no): y
Unloading i2c-dev... OK
Unloading cpuid... OK

[anakin@anakin-pc ~]$ sudo systemctl --global enable lm_sensors.service
[sudo] password for anakin: 
Failed to enable unit, unit lm_sensors.service does not exist.

sensors

ve

systemctl status lm_sensors

ne diyor?

sensors

ve

systemctl status lm_sensors

ne diyor?

sensors:

asus-isa-0000
Adapter: ISA adapter
cpu_fan:        0 RPM

fam15h_power-pci-00c4
Adapter: PCI adapter
power1:       55.58 W  (crit = 125.19 W)

it8721-isa-0290
Adapter: ISA adapter
in0:          +2.80 V  (min =  +1.18 V, max =  +2.00 V)  ALARM
in1:          +2.80 V  (min =  +1.28 V, max =  +0.46 V)  ALARM
in2:          +0.89 V  (min =  +2.51 V, max =  +1.48 V)  ALARM
+3.3V:        +3.24 V  (min =  +3.26 V, max =  +3.91 V)  ALARM
in4:          +1.54 V  (min =  +1.43 V, max =  +0.08 V)  ALARM
in5:          +2.53 V  (min =  +2.87 V, max =  +1.26 V)  ALARM
in6:          +1.73 V  (min =  +1.03 V, max =  +2.54 V)
3VSB:         +0.00 V  (min =  +5.71 V, max =  +6.00 V)  ALARM
Vbat:         +3.38 V  
fan1:        1603 RPM  (min =   21 RPM)
fan2:         991 RPM  (min =   12 RPM)
fan3:           0 RPM  (min =   11 RPM)  ALARM
temp1:        +38.0°C  (low  = -36.0°C, high = -41.0°C)  ALARM  sensor = thermistor
temp2:        +34.0°C  (low  = +115.0°C, high = -85.0°C)  ALARM  sensor = thermistor
temp3:       -128.0°C  (low  =  -2.0°C, high = -50.0°C)  sensor = disabled
intrusion0:  OK

k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +23.0°C  (high = +70.0°C)
                       (crit = +90.0°C, hyst = +87.0°C)

systemctl status lm_sensors:

● lm_sensors.service - Initialize hardware monitoring sensors
   Loaded: loaded (/usr/lib/systemd/system/lm_sensors.service; enabled; vendor preset: disabled)
   Active: active (exited) since Mon 2017-09-04 03:21:25 +03; 2h 20min left
  Process: 520 ExecStart=/usr/bin/sensors -s (code=exited, status=0/SUCCESS)
  Process: 511 ExecStart=/sbin/modprobe -qab $BUS_MODULES $HWMON_MODULES (code=exited, status=0/SUCCESS)              
 Main PID: 520 (code=exited, status=0/SUCCESS)                                                                        
    Tasks: 0 (limit: 4915)                                                                                            
   CGroup: /system.slice/lm_sensors.service                                                                           
                                                                                                                      
Eyl 04 03:21:25 anakin-pc systemd[1]: Starting Initialize hardware monitoring sensors...                              
Eyl 04 03:21:25 anakin-pc systemd[1]: Started Initialize hardware monitoring sensors. 

Aynı sıkıntıyı dune kadar bende yaşıyordum. Sorunu aşağıdaki kodu girerek çözdüm.
Aşağıdaki işlemi uygulayıp fan hızını ve sıcaklığını tekrar kontrol eder misin?

sudo modprobe it87

Aynı sıkıntıyı dune kadar bende yaşıyordum. Sorunu aşağıdaki kodu girerek çözdüm.
Aşağıdaki işlemi uygulayıp fan hızını ve sıcaklığını tekrar kontrol eder misin?

sudo modprobe it87

herhangi bir değişiklik olmadı malesef 🙁

anakart asus m5a99fx pro R2.0

Uzunca araştırdım ama bir çözüm bulamadım, sıkıntı sensor modülleri ile alakalı.
Xsensors ile nasıl görünüyor?

sudo pacman -S xsensors

xsensors u kurdum fakat çalışmadı app dashboard da gözükmüyor konsole üzerinden açtığımda da gui failed veriyor..